Policy Bulletin 2: Pedal rubber

March 30, 2012

Type: Policy Bulletin

Affected Models: Golf car MY 2010-2011

Affected VIN:

Bulletin Number



Garia A/S has discovered that the pedal rubber stripes on the pedals show signs of unusual wear and tear on cars used on golf courses permitting the use of steel spikes on golf shoes.


Change the rubber stripes on the break- and accelerator pedal, so the visual appearance of the vehicle is kept.

Parts Information

The spare parts required for this repair can be ordered directly at Garia, when ordering present the VIN of the vehicle.


Instruction for accomplishment:

Function numbers to be used: 

1608- Carrying out Policy bulletin PB00002

Time: 0,30 hours

Spare parts required:
Part number: G21131001100 - Pedal rubber repair set 
QTY / Vehicle: 1
The set contains accelerator & brake pedal rubber

Tools needed:
Screwdriver or similar to push with.


  1. Remove the pedal rubber
    PB 02 pic 1
    To remove the rubber on the accelerator pedal, push the 6 plastic lock taps to release the rubber on the pedal
  2. New rubber strips for both pedals 
    PB 02 pic 2

  3. Installing the pedal rubber 
    PB 02 pic 3
    Before refitting can take place it is needed to lubricate the plastic lock taps on the new rubber. Preferably using silicone base or similar.
    Refit the rubber on the brake pedal using the same procedure. 

  4. Before 
    PB 02 pic 4

  5. After 
    PB 02 pic 5

  6. In the "Quick guide and service book", under section 05- Notes, write: Policy bulletin PB00002 - Pedal rubber completed - Signature, date and stamp.