Print

Policy bulletin 14: Brake light issue

April 18, 2018


Type: Policy Bulletin

Affected Models: Golf cars produced before may 2018

Affected VIN:


Bulletin Number

PB 000014

Subject

Garia A/S has discovered  that the brake light can activates by itself in some rare cases.


Correction

A realignment of the brake pedal is necessary to create play in the push rod between pedal and master brake cylinder. This will prevent pressure build up in the rear brake circuit. If the brake light continues to activate it is recommended to move the pressure switch from the rear circuit to the front circuit on the master cylinder. Remember to bleed the brakes after this


Parts Information

No parts are needed.

In the case of moving pressure switch it is recommended to install new copper washers on banjo fittings (4pcs. In total)


Download bulletin