Print

Service bulletin 10: Controller software, motor temperature sensor value change

August 8, 2019

Type: Service Bulletin

Affected Models: Golf Car, Utility

Affected VIN:

Golf and leisure vehicles:
UJGGH..XXXXXX..005495 to UJGGH..XXXXXX..005982
Utility vehicles: 
From VIN UJGU..XXXXXXX..000663 to UJGU..XXXXXXX..000969

Bulletin Number

SB00010

Subject

Garia has identified that some motors could be equipped with a newer style motor temperature sensor that could give the controller a false temperature reading.

Correction

Your authorized Garia dealer will install new controller software that will process the value produced by the newer motor temperature sensor.

Parts Information

Part number: Software that matches the vehicle type based on VIN number and motor identification tag.  The SW
QTY / Vehicle: 1

Garia has identified that some motors could be equipped with a newer style motor temperature sensor that could give the controller a false temperature reading. This could result in the controller thinking that the motor is overheating resulting in a reduced power mode or complete stall of the Garia. New software has been accomplished to allow the controller to process the values from the newer temperature sensor.

To identify if your vehicle might be affected, look for the identification plate on your motor, lower left corner of the plate, and if you see PT1000 your vehicle might be affected.

SB10

FOR DEALER AND SERVICE PARTNERS 

Instruction for accomplishment: 

GSTG (Garia standard time guide) labor operation to be used: 

1524 – Service bulletin 10:  Controller software, motor temperature sensor value change

Time: 0,10 hours

Tools needed:

Curtis 1309 USB programmer.

Programming computer shipped by Garia upon warranty claim submission.

INSTRUCTION FOR ACCOMPLISHMENT

  1. Contact Garia with the complete VIN number to initiate the process to obtain the new controller software.  Garia will provide additional information about the update and how to successfully complete the software update.  When possible please plan on performing the bulletin on multiple vehicles at a time.
  2. Remove the customers "Quick guide and service book" from the storage net located under the bonnet (if missing please ask the customer for the book). Under the notes section please document the following information. "Service bulletin SB00010 - Controller software, motor temperature sensor value change, Dealer Name, Technician initials, Date performed."